Cables

Hemisphere GNSS S Series QT400-T UHF Antenna (TNC)

OverView Connector Dustcap: Dust cap for all OverView connectors; 5 pack White cap only. Cable not included. Ship Weight: 0.50 lbs

OverView Camera Magnets: Kit Includes: 2 OverView Camera Bracket Magnet Mounts 2 Bracket Mounting screws 2 Semi-permanent Neodymium magnets Can ONLY be used with OverView camera brackets (do not fit AgCam or...

OverView Camera Bracket: Kit Includes:  OverView Up Bracket OverView Down Bracket 2 Bracket Screws, washes and nuts 2 Rubber Bracket Pads Allen Wrench Can ONLY be used with OverView cameras (does not fit AgCam or EnduraCam) Ship Weight:...

OverView 7in Monitor Wire Harness: (DMOV-7M-MWH) Replacement cable for all standard 7in OverView monitors• Camera Input – 3 OverView Camera Inputs• Power Input – 12v or AC• 3 Event triggers• Video Output – RCA...

OverView Five Camera Trailer Connector: Kit Includes Qty (3) three cables that allow for flush mounting on vehicle and trailer. Coiled center cable allows for a maximum distance of 12ft between vehicle and trailer. Length: 6-19 ft : Ship Weight: 3.00 lbs

OverView One Camera Trailer Connector Kit: Kit Includes Qty (3) three cables that allow for flush mounting on vehicle and trailer. Coiled center cable allows for a maximum distance of 12ft between vehicle and trailer. Length: 4-15 ft : Ship Weight: 1.50...

OverView Shielded Power Video Cable: Power/video extension cable Connections – OverView Connector (4 pin) Jacketing – PVC Cable Length: 10 ft (DMOV-EC10) 20ft (DMOV-EC20) 40ft (DMOV-EC40) 50ft (DMOV-EC50) 65ft (DMOV-EC65) 75ft...

OverView Camera Adapter Cable with Deutsch DTM06-4S: Allows for the single input of an OverView camera into Bobcat R Series monitor. Camera Input – 1 OverView Camera Input Power Input – None required, camera powered by monitor Connections...

OverView Camera to AgLeader Monitor Video Adapter Cable: Allows for the input of up to four OverView cameras into AgLeader Integra & Versa monitors. Video Inputs – 4 OverView Camera Inputs Power Input – Included 12v Cigarette Lighter...

OverView Camera to CNH IntelliView Three Camera Video Adapter Cable: Allows for the input of up to three OverView cameras into a Case IH New Holland IntelliView or AFS Pro monitor Camera Input – 3 OverView camera inputs Power Input –...

OverView Camera to CNH IntelliView or DVR One Camera Video Adapter Cable: Allows for the input of a single OverView camera into a Case IH New Holland IntelliView  AFS Pro or DVR Camera Input – 1 OverView Camera Input Power Input –...

OverView Camera to CNH 7pin Mini Amp Video Adapter Cable: Allows for the input of one OverView camera into pre-wired Case IH New Holland combines Camera Input – 1 OverView Camera Input Power Input – None required, camera powered by...

OverView Camera to Trimble Video Adapter Cable: Allows for the input of a single OverView camera into a Trimble TmX, FmX or 750 monitor Camera Input – 1 OverView Camera Input Power Input – None required, camera powered by...

OverView Camera to CAT/Orlaco Video Adapter Cable: Allows for the input of a single OverView camera into CAT pre-wired monitors. Length: 16 in : Ship Weight: 0.10 lbs

OverView Camera to JD Command Center Video Adapter Cable: Allows for the input of a single OverView camera into John Deere Command Center Console and 4600 Gen 4 Monitors  Camera Input – 1 OverView camera input Power Input – None...

OverView Camera to JD CommandView II Cab Video Adapter Cable: Allows for the input of two OverView cameras into John Deere CommandView II and 4600 Monitors Camera Input – 2 OverView camera Inputs Power Input – None required, cameras...

OverView Camera to JD 6R Command Center or NH CR Combine Video Adapter Cable: Allows for the input of a single OverView camera into a John Deere 6R Series or New Holland CR Combine Monitor Camera Input – 1 OverView camera input Power Input...

OverView Monitor to Audiovox Video Adapter Cable: Allows for the input of a single Audiovox Voyager or ToughCam camera into an OverView Monitor Camera Input – 1 3rd party Camera Input  Connections – OverView Female (4-pin) to...

OverView Camera to Audiovox Video Adapter Cable: Allows for the input of a single Overview camera into Audiovox Voyager and ToughCam monitors Camera Input – 1 OverView Camera Input Power Input – None required, camera powered by...

OverView Camera to JD2630 Three Camera Video Adapter Cable: Allows for the input of up to three OverView cameras into John Deere GS3 2630 Monitors Camera Input – 3 OverView camera inputs Power Input – JD Power plug Connections –...

OverView Camera to JD4640 Four Camera Video Adapter Cable: Allows for the input of up to four OverView cameras into John Deere GS4 4640 Monitors Camera Input – 4 OverView camera inputs Power Input – John Deere Power plug Connections...

AgCam/EnduraCam/RazerCam Female Dust Cap: Dust cap for Female Connectors. Ship Weight: 0.01 lbs Note: Cable for photo only. No cables are included with product

DM 7” & 9” Monitor Wire Harness Locking Replacement: DM-MWHCamera Input – 4 AgCam/EnduraCam/RazerCam Camera InputsPower Input – 12v/ACConnections – AgCam/EnduraCam/RazerCam Female (5 pin)-RCA Female-Event...

Monitor In-line Noise Supressor: Ferrite ring suppresses noise from monitor and filters out unwanted external interference . Ship Weight: 0.15 lbs   User Manual

Male BNC to Female RCA Adapter: DMAC-BNC-RCAAdapts BNC into RCA for input into older style electronics.Ship Weight: 0.01 lbs   Dakota Micro Monitor to RCA Male Adapter Cable: DMAC-AV-MAllows for input of a DVD/DVR into a Dakota Micro...

AgCam/EnduraCam/RazerCam 16ft Multi-Camera Power Video Cable: Four Camera Power/Video Junction cable allows for up to four cameras to be run on a single cable. Watertight 1/4 twist locks keep cables securely locked together. Camera Input – 4...

AgCam/EnduraCam/RazerCam 20ft Reinforced Shielding Power Video Cable:20ft power video extension cable with additional internal steel braiding for extra abrasion and pull resistance.Length: 20 ft : Ship Weight: 0.70...

AgCam/EnduraCam/RazerCam 10ft Shielded Power Video Cable: DMAC-EC1010ft power video extension cable with watertight connectors.Length: 10 ft : Ship Weight: 0.50 lbs   AgCam/EnduraCam/RazerCam 15ft Shielded Power Video Cable: DMAC-EC1515ft...

AgCam/EnduraCam/RazerCam 1ft thru tank or cab Extension Cable:Length: 12 in : Ship Weight: 0.10 lbs   AgCam/EnduraCam/RazerCam 6ft thru tank or cab Extension Cable:Length: 6 ft : Ship Weight: 0.20 lbs   Thru Tank/Cab Adapter...

AgCam/EnduraCam/RazerCam Camera Adapter Cable with Deutsch DTM06- 4S Allows for the single input of an AgCam, EnduraCam, or RazerCam camera into Bobcat R Series monitor. Camera Input – 1 AgCam/EnduraCam/RazerCam Camera Input Power Input...

AgCam/EnduraCam/RazerCam camera to Force America SSC6100 Control System Monitor adapter cable This adapter cable allows for the input of a single AgCam/EnduraCam/RazerCam cameras into Force America SSC6100 control system monitors. Camera Input...

AgCam or EnduraCam Camera Tail – Straight: (DMAC-CT) 36" Camera tail, detachable, replacement or extra - Straight Length: 36 in : Ship Weight: 0.10 lbs   AgCam or EnduraCam 10ft Camera Tail – Straight: (DM-CT10) 10ft Camera...

AgCam/EnduraCam/RazerCam Camera to C2000 Monitor Video Adapter Cable: Allows for the input of up to two AgCam/EnduraCam/RazerCam Analog/CVBS PAL cameras into AGCO C2000 monitorsFunctional on 2009 Challenger, Massey, and Gleaner, All U Serial...

AgCam/EnduraCam/RazerCam Camera to C1000 Monitor Video Adapter Cable: Allows for the input of a single AgCam/EnduraCam/RazerCam camera into AGCO C1000 monitorsFunctional on 2010-2015 MF8600 Series AGCO DT-B Series, Challenger C-seriesRequires PAL...

AgCam/EnduraCam/RazerCam Camera to 5-pin Male M12 Adapter Cable: Allows for the input of a single AgCam/EnduraCam/RazerCam camera into a Fendt VarioTerminal, AGCO Global cabs and John Deere S-series Combines, Cotton Pickers &...

AgCam/EnduraCam/RazerCam Camera to Versatile Monitor Adapter Cable: Allows for the input of a Single AgCam/EnduraCam/RazerCam PAL camera into Versatile MonitorsRequires PAL Analog Camera Camera Input – 1 AgCam/EnduraCam/RazerCam PAL Camera...

Single Camera to Dual Monitor Adapter Cable: AgCam/EnduraCam/RazerCam single camera image to two Dakota Micro, Inc. monitors adapter cable. Length: 21 in : .20 lbs  

AgCam/EnduraCam/RazerCam Five Camera Trailer Connector Kit: Allows for flush mounting on vehicle and trailer Camera Input – 5 AgCam or EnduraCam Camera Inputs Power Input – None required, camera powered by monitor Connections –...

AgCam/EnduraCam/RazerCam One Camera Trailer Connector Kit: Allows for flush mounting on vehicle and trailer Camera Input – 1 AgCam or EnduraCam Camera Input Power Input – None required, camera powered by monitor Connections –...

AgCam/EnduraCam/RazerCam Camera to BNC Female with Separate Power Video Adapter Cable: Allows for the input of a single AgCam/EnduraCam/RazerCam camera into 3rd party system via BNC port Camera Input – 1 AgCam/EnduraCam/RazerCam Camera...

AgCam/EnduraCam/RazerCam Camera to BNC Female Video Adapter Cable: Allows for the input of a 3rd party camera with a BNC female connector to be input into a Dakota Micro Monitor Camera Input – 1 3rd party Camera input Power Input – None...

AgCam/EnduraCam/RazerCam Camera to TV Adapter with AC Power Adapter Cable: Allows for the input of a single AgCam/EnduraCam/RazerCam camera into an RCA device, such as a TV Camera Input – 1 AgCam/EnduraCam/RazerCam Camera Input Power Input...

AgCam/EnduraCam/RazerCam Camera to Mueller Touch 800/1200: Allows for the input of a single AgCam/EnduraCam/RazerCam camera into Mueller Touch 800 & 1200 monitors.Requires PAL Analog Camera Camera Input – 1 AgCam/EnduraCam/RazerCam PAL...

AgCam/EnduraCam/RazerCam Camera to Threaded Collar S-Video male (Motec) Video Adapter Cable: Allows for the input of a single AgCam/EnduraCam/RazerCam camera into 3rd party monitor utilizing threaded collar s-video connector such as Motec Camera...

Dakota Micro Monitor to Threaded Collar S-Video Female (Motec) Video Adapter Cable: Allows for the input of a single 3rd party camera utilizing threaded collar s-video connector such as Motec to be input into a Dakota Micro Monitor Camera Input...

AgCam/EnduraCam/RazerCam Camera to AgLeader Monitor Video Adapter Cable: Allows for the input of up to four AgCam/EnduraCam/RazerCam cameras into AgLeader Integra or Versa monitors Camera Input – 4 AgCam/EnduraCam/RazerCam Camera Inputs Power...

AgCam/EnduraCam/RazerCam Camera to Trimble Video Adapter Cable: Allows for the input of a single AgCam/EnduraCam/RazerCam camera into a Trimble TmX, FmX or 750 monitor Camera Input – 1 AgCam/EnduraCam/RazerCam Camera Input Power Input –...

AgCam/EnduraCam/RazerCam Camera to Danfoss Monitor: Allows for the input of up to two AgCam/EnduraCam/RazerCam cameras into a DanFoss Monitor Camera Input – 2 AgCam/EnduraCam/RazerCam Camera Inputs Power Input – None required, camera...

AgCam/EnduraCam/RazerCam Camera to Case IH New Holland AFS Pro 1200: Allows for the input of two AgCam/EnduraCam/RazerCam cameras into AFS Pro 1200 monitors and New Holland T8 and T9 with PLM intelligence.  Camera Input – 2...

AgCam/EnduraCam/RazerCam Camera to Camera Ready Case IH 40 Series Sprayer with CNH Pro 700 Monitor Adapter Cable: Allows for the input of up to three AgCam/EnduraCam/RazerCam Analog cameras into Case IH 40 series sprayers with Pro 700...

AgCam/EnduraCam/RazerCam Camera to CNH 7-pin Mini Amp Video Adapter Cable: Allows for the input of a single AgCam/EnduraCam/RazerCam Analog camera into pre-wired Case IH New Holland combines Camera Input – 1 AgCam/EnduraCam/RazerCam Analog...

AgCam/EnduraCam/RazerCam Camera to CNH IntelliView Three Camera Video Adapter Cable: Allows for the input of up to three AgCam/EnduraCam/RazerCam cameras into Case IH New Holland  IntelliView or AFS Pro monitors  Camera Input – 3...

AgCam/EnduraCam/RazerCam Camera to CNH IntelliView or DVR One Camera Video Adapter Cable: Allows for the input of a single AgCam/EnduraCam/RazerCam Analog/CVBS camera into a Case IH New Holland IntelliView Monitor or DVR  Camera Input – 1...

Dakota Micro Monitor to Audiovox Video Adapter Cable: Allows for the input of one Audiovox, Voyager or ToughCam camera into a Dakota Micro Monitor Camera Input – 1 3rd party Camera Input Power Input – None required, camera powered by...

AgCam/EnduraCam/RazerCam Camera to Audiovox Video Adapter Cable: Allows for the input of a single AgCam/EnduraCam/RazerCam camera into Audiovox, Voyager and ToughCam monitors  Camera Input – 1 AgCam/EnduraCam/RazerCam Camera Input Power...

AgCam/EnduraCam/RazerCam Camera to OverView Monitor Adapter Cable: Allows for a single AgCam/EnduraCam/RazerCam Analog/CVBS camera to be input into all OverView or CabCam Monitors Camera Input – 1 AgCam/EnduraCam/RazerCam Camera Input Power...

OverView Camera to Dakota Micro Monitor Video Adapter Cable: Allows for the input of a single OverView or CabCam Camera into a Dakota Micro Monitor Camera Input – 1 3rd party Camera Input Power Input – None required, camera powered by...

AgCam/EnduraCam/RazerCam Camera to TOPCON X30 and C3000 Adapter Cable: Allows for the input of up to two AgCam/EnduraCam/RazerCam cameras into TOPCON X30 monitors or AGCO C2200 & C3000 monitors Camera Input – 2 AgCam/EnduraCam/RazerCam...

AgCam/EnduraCam/RazerCam Camera to USB Adapter Cable: Allows for the input of up to two AgCam, EnduraCam or RazerCam cameras into USB port. Separate power required.*Customer responsible for computer & networking troubleshooting Length: 64.75 in...

AgCam/EnduraCam/RazerCam Camera to Claas Video Adapter Cable: Allows for the input of a single AgCam, EnduraCam or RazerCam camera into Claas pre-wired equipment. Length: 11 in : Ship Weight: 0.10 lbs   User Manual DMAC-CLS

AgCam/EnduraCam/RazerCam Camera to CAT/Orlaco Video Adapter Cable: Allows for the input of a single AgCam, EnduraCam or RazerCam camera into CAT pre-wired equipment as well as the Orlaco Monitor. Length: 16 in : Ship Weight: 0.10 lbs   User...

AgCam/EnduraCam/RazerCam Camera JD CommandView II Cab Video Adapter Cable: Allows for the input of up to two AgCam, EnduraCam or RazerCam cameras into JD CommandView II Monitors. Length: 79 in : Ship Weight: 0.35 lbs   User Manual...

AgCam/EnduraCam/RazerCam Camera to JD 6R or NH CR Combine Video Adapter Cable: Allows for the input of a single AgCam, EnduraCam or RazerCam camera into JD 6R Series Command Center Console Monitor or NH CR Combine. Length: 180 in : Ship Weight: 0.60...

AgCam/EnduraCam/RazerCam Camera to JD Command Center Video or 4600 Gen 4 Adapter Cable: Allows for the input of a single AgCam, EnduraCam or RazerCam camera into JD Command Center Console and 4600 Gen 4 Monitors. Length: 20 ft : Ship Weight: 0.55...

AgCam/EnduraCam/RazerCam Camera to JD2630 Three Camera Video Adapter Cable: Allows for the input of up to three AgCam, EnduraCam or RazerCam cameras into JD GS3 2630 Monitors. Length: 133 in : Ship Weight: 0.90 lbs Important: This cable...

AgCam/EnduraCam/RazerCam Camera to JD4640 Four Camera Video Adapter Cable: Allows for the input of up to four AgCam, EnduraCam or RazerCam cameras into JD GS4 4640 Monitors. Length: 133 in : Ship Weight 1.00 lbs   Camera Input – 4...

DM Wireless 20ft Antenna Extension Cable: Allows for the mounting of wireless antennas that require lengths over 40ft. Several can be used together for distances up to 100ft. Length: 20 ft : Ship Weight: 0.50 lbs   DM Wireless 20ft Antenna...