Accessories

Hemisphere GNSS S Series QT400-T UHF Antenna (TNC)

Universal Cam -Case for Small Electronics-BlackSoft Nylon Pouch w/ Shoulder Strap. Includes small outside and interior pockets.Outer dimensions 6.5 x 5.5 x 3 inches (190mm x 170mm x 90mm) MSRP: $12.00

Single Clear Premium Screen Protector for Cedar CT8 and CT8X2 tabletHigh quality screen protector for 8" touch screen

A snug but soft nylon flip cover/ case with shoulder strap for both the Cedar CT8 and CT8X2. MSRP: $39.00

Removable Li-ion Battery Kit for the Cedar CT8X2 Tablet8000mAh, 30.4 Whr Li-Ion battery

Single Anti-Glare Premium Screen Protector for Juniper Mesa2 and Mesa3 tabletHigh quality Anti-Glare screen protector for 7 inch diagonal touch screen

Removable Li-ion Battery Kit for the Mesa3 Tablet (Android or Windows)7.2V @6000mAh, 43.2Whr Li-Ion battery

LNC Rugged Transport CaseSpecs:Black, egg crate foam and pluck-pull, TSA compliant, water and dust resistant, floats.5lbs., 13x11x6.5 MSRP: $68.00

OverView Connector Dustcap: Dust cap for all OverView connectors; 5 pack White cap only. Cable not included. Ship Weight: 0.50 lbs

OverView Camera Magnets: Kit Includes: 2 OverView Camera Bracket Magnet Mounts 2 Bracket Mounting screws 2 Semi-permanent Neodymium magnets Can ONLY be used with OverView camera brackets (do not fit AgCam or...

OverView Camera Bracket: Kit Includes:  OverView Up Bracket OverView Down Bracket 2 Bracket Screws, washes and nuts 2 Rubber Bracket Pads Allen Wrench Can ONLY be used with OverView cameras (does not fit AgCam or EnduraCam) Ship Weight:...

OverView Monitor Remote: Remote functions with both OverView Monitors (Standard & Quad) Monitor Remote Control Monitor Remote Control Battery Ship Weight: 0.05 lbs

OverView 7in Monitor Wire Harness: (DMOV-7M-MWH) Replacement cable for all standard 7in OverView monitors• Camera Input – 3 OverView Camera Inputs• Power Input – 12v or AC• 3 Event triggers• Video Output – RCA...

OverView Five Camera Trailer Connector: Kit Includes Qty (3) three cables that allow for flush mounting on vehicle and trailer. Coiled center cable allows for a maximum distance of 12ft between vehicle and trailer. Length: 6-19 ft : Ship Weight: 3.00 lbs

OverView One Camera Trailer Connector Kit: Kit Includes Qty (3) three cables that allow for flush mounting on vehicle and trailer. Coiled center cable allows for a maximum distance of 12ft between vehicle and trailer. Length: 4-15 ft : Ship Weight: 1.50...

OverView Shielded Power Video Cable: Power/video extension cable Connections – OverView Connector (4 pin) Jacketing – PVC Cable Length: 10 ft (DMOV-EC10) 20ft (DMOV-EC20) 40ft (DMOV-EC40) 50ft (DMOV-EC50) 65ft (DMOV-EC65) 75ft...

OverView Camera Adapter Cable with Deutsch DTM06-4S: Allows for the single input of an OverView camera into Bobcat R Series monitor. Camera Input – 1 OverView Camera Input Power Input – None required, camera powered by monitor Connections...

OverView Camera to AgLeader Monitor Video Adapter Cable: Allows for the input of up to four OverView cameras into AgLeader Integra & Versa monitors. Video Inputs – 4 OverView Camera Inputs Power Input – Included 12v Cigarette Lighter...

OverView Camera to CNH IntelliView Three Camera Video Adapter Cable: Allows for the input of up to three OverView cameras into a Case IH New Holland IntelliView or AFS Pro monitor Camera Input – 3 OverView camera inputs Power Input –...

OverView Camera to CNH IntelliView or DVR One Camera Video Adapter Cable: Allows for the input of a single OverView camera into a Case IH New Holland IntelliView  AFS Pro or DVR Camera Input – 1 OverView Camera Input Power Input –...

OverView Camera to CNH 7pin Mini Amp Video Adapter Cable: Allows for the input of one OverView camera into pre-wired Case IH New Holland combines Camera Input – 1 OverView Camera Input Power Input – None required, camera powered by...

OverView Camera to Trimble Video Adapter Cable: Allows for the input of a single OverView camera into a Trimble TmX, FmX or 750 monitor Camera Input – 1 OverView Camera Input Power Input – None required, camera powered by...

OverView Camera to CAT/Orlaco Video Adapter Cable: Allows for the input of a single OverView camera into CAT pre-wired monitors. Length: 16 in : Ship Weight: 0.10 lbs

OverView Camera to JD Command Center Video Adapter Cable: Allows for the input of a single OverView camera into John Deere Command Center Console and 4600 Gen 4 Monitors  Camera Input – 1 OverView camera input Power Input – None...

OverView Camera to JD CommandView II Cab Video Adapter Cable: Allows for the input of two OverView cameras into John Deere CommandView II and 4600 Monitors Camera Input – 2 OverView camera Inputs Power Input – None required, cameras...

OverView Camera to JD 6R Command Center or NH CR Combine Video Adapter Cable: Allows for the input of a single OverView camera into a John Deere 6R Series or New Holland CR Combine Monitor Camera Input – 1 OverView camera input Power Input...

OverView Monitor to Audiovox Video Adapter Cable: Allows for the input of a single Audiovox Voyager or ToughCam camera into an OverView Monitor Camera Input – 1 3rd party Camera Input  Connections – OverView Female (4-pin) to...

OverView Camera to Audiovox Video Adapter Cable: Allows for the input of a single Overview camera into Audiovox Voyager and ToughCam monitors Camera Input – 1 OverView Camera Input Power Input – None required, camera powered by...

OverView Camera to JD2630 Three Camera Video Adapter Cable: Allows for the input of up to three OverView cameras into John Deere GS3 2630 Monitors Camera Input – 3 OverView camera inputs Power Input – JD Power plug Connections –...

OverView Camera to JD4640 Four Camera Video Adapter Cable: Allows for the input of up to four OverView cameras into John Deere GS4 4640 Monitors Camera Input – 4 OverView camera inputs Power Input – John Deere Power plug Connections...

Dakota Micro Analog Monitor Remote: Indicate monitor serial number when ordering. Ship Weight: 0.03 lbs

AgCam or EnduraCam Camera Magnet: 65# Magnet for Camera Bracket and mounting hardware. Ship Weight: 0.45 lbs

AgCam/EnduraCam/RazerCam Female Dust Cap: Dust cap for Female Connectors. Ship Weight: 0.01 lbs Note: Cable for photo only. No cables are included with product

DM 7” & 9” Monitor Wire Harness Locking Replacement: DM-MWHCamera Input – 4 AgCam/EnduraCam/RazerCam Camera InputsPower Input – 12v/ACConnections – AgCam/EnduraCam/RazerCam Female (5 pin)-RCA Female-Event...

Monitor In-line Noise Supressor: Ferrite ring suppresses noise from monitor and filters out unwanted external interference . Ship Weight: 0.15 lbs   User Manual

AgCam or EnduraCam Camera Mounting Bracket w/ Magnet: Includes all required fasteners to attach magnet to bracket and bracket to camera. Includes Allen wrench. Ship Weight: 0.55 lbs

Male BNC to Female RCA Adapter: DMAC-BNC-RCAAdapts BNC into RCA for input into older style electronics.Ship Weight: 0.01 lbs   Dakota Micro Monitor to RCA Male Adapter Cable: DMAC-AV-MAllows for input of a DVD/DVR into a Dakota Micro...

A/C Power Adapter Locking, North American(>3 amp): DM-PA3Allows for A/C Power input to all Dakota Micro products. Required for DM-H9Q monitors. Note: Interchangeable with DMAC-PA3Length: 36 in : Ship Weight: 0.40 lbs   12v Deutsch DTH...

AgCam/EnduraCam/RazerCam 16ft Multi-Camera Power Video Cable: Four Camera Power/Video Junction cable allows for up to four cameras to be run on a single cable. Watertight 1/4 twist locks keep cables securely locked together. Camera Input – 4...

AgCam/EnduraCam/RazerCam 20ft Reinforced Shielding Power Video Cable:20ft power video extension cable with additional internal steel braiding for extra abrasion and pull resistance.Length: 20 ft : Ship Weight: 0.70...

AgCam/EnduraCam/RazerCam 10ft Shielded Power Video Cable: DMAC-EC1010ft power video extension cable with watertight connectors.Length: 10 ft : Ship Weight: 0.50 lbs   AgCam/EnduraCam/RazerCam 15ft Shielded Power Video Cable: DMAC-EC1515ft...

AgCam/EnduraCam/RazerCam 1ft thru tank or cab Extension Cable:Length: 12 in : Ship Weight: 0.10 lbs   AgCam/EnduraCam/RazerCam 6ft thru tank or cab Extension Cable:Length: 6 ft : Ship Weight: 0.20 lbs   Thru Tank/Cab Adapter...

7in Monitor Skid Steer U-Bracket Stand: Heavy duty U-bracket with special clips to install monitor to cage inside skid steer. Height: 4 in : Ship Weight: 0.40 lbs

7in Monitor U-Bracket Stand: U-bracket Monitor stand attaches to both sides of monitor with wing bolts. For use ONLY with monitor SN’s 6290 and up. Height: 4 in : Ship Weight: 0.35 lbs   9in Monitor U-Bracket Stand: U-bracket...

Dakota Micro Monitor Stand: Extra/Replacement adhesive monitor base. Height: 4 in : Ship Weight: 0.25 lbs

Bar Mount Monitor Mount by Panavise: Securely mount your Dakota Micro monitor to any bar. Replaces included monitor bracket. Height: 5.5 in : Ship Weight: 0.50 lbs

Suction Cup Monitor Mount by Panavise: Securely mount your Dakota Micro monitor to any glass surfacePanavise Suction Cup mount replaces included monitor bracket Securely mount your Dakota Micro monitor to any glass surface. Replaces included monitor...

AgCam/EnduraCam/RazerCam Camera Adapter Cable with Deutsch DTM06- 4S Allows for the single input of an AgCam, EnduraCam, or RazerCam camera into Bobcat R Series monitor. Camera Input – 1 AgCam/EnduraCam/RazerCam Camera Input Power Input...

AgCam/EnduraCam/RazerCam camera to Force America SSC6100 Control System Monitor adapter cable This adapter cable allows for the input of a single AgCam/EnduraCam/RazerCam cameras into Force America SSC6100 control system monitors. Camera Input...

AgCam or EnduraCam Camera Tail – Straight: (DMAC-CT) 36" Camera tail, detachable, replacement or extra - Straight Length: 36 in : Ship Weight: 0.10 lbs   AgCam or EnduraCam 10ft Camera Tail – Straight: (DM-CT10) 10ft Camera...

AgCam/EnduraCam/RazerCam Camera to C2000 Monitor Video Adapter Cable: Allows for the input of up to two AgCam/EnduraCam/RazerCam Analog/CVBS PAL cameras into AGCO C2000 monitorsFunctional on 2009 Challenger, Massey, and Gleaner, All U Serial...

AgCam/EnduraCam/RazerCam Camera to C1000 Monitor Video Adapter Cable: Allows for the input of a single AgCam/EnduraCam/RazerCam camera into AGCO C1000 monitorsFunctional on 2010-2015 MF8600 Series AGCO DT-B Series, Challenger C-seriesRequires PAL...

AgCam/EnduraCam/RazerCam Camera to 5-pin Male M12 Adapter Cable: Allows for the input of a single AgCam/EnduraCam/RazerCam camera into a Fendt VarioTerminal, AGCO Global cabs and John Deere S-series Combines, Cotton Pickers &...

AgCam/EnduraCam/RazerCam Camera to Versatile Monitor Adapter Cable: Allows for the input of a Single AgCam/EnduraCam/RazerCam PAL camera into Versatile MonitorsRequires PAL Analog Camera Camera Input – 1 AgCam/EnduraCam/RazerCam PAL Camera...

Single Camera to Dual Monitor Adapter Cable: AgCam/EnduraCam/RazerCam single camera image to two Dakota Micro, Inc. monitors adapter cable. Length: 21 in : .20 lbs  

AgCam/EnduraCam/RazerCam Five Camera Trailer Connector Kit: Allows for flush mounting on vehicle and trailer Camera Input – 5 AgCam or EnduraCam Camera Inputs Power Input – None required, camera powered by monitor Connections –...

AgCam/EnduraCam/RazerCam One Camera Trailer Connector Kit: Allows for flush mounting on vehicle and trailer Camera Input – 1 AgCam or EnduraCam Camera Input Power Input – None required, camera powered by monitor Connections –...

AgCam/EnduraCam/RazerCam Camera to BNC Female with Separate Power Video Adapter Cable: Allows for the input of a single AgCam/EnduraCam/RazerCam camera into 3rd party system via BNC port Camera Input – 1 AgCam/EnduraCam/RazerCam Camera...

AgCam/EnduraCam/RazerCam Camera to BNC Female Video Adapter Cable: Allows for the input of a 3rd party camera with a BNC female connector to be input into a Dakota Micro Monitor Camera Input – 1 3rd party Camera input Power Input – None...

AgCam/EnduraCam/RazerCam Camera to TV Adapter with AC Power Adapter Cable: Allows for the input of a single AgCam/EnduraCam/RazerCam camera into an RCA device, such as a TV Camera Input – 1 AgCam/EnduraCam/RazerCam Camera Input Power Input...

AgCam/EnduraCam/RazerCam Camera to Mueller Touch 800/1200: Allows for the input of a single AgCam/EnduraCam/RazerCam camera into Mueller Touch 800 & 1200 monitors.Requires PAL Analog Camera Camera Input – 1 AgCam/EnduraCam/RazerCam PAL...

AgCam/EnduraCam/RazerCam Camera to Threaded Collar S-Video male (Motec) Video Adapter Cable: Allows for the input of a single AgCam/EnduraCam/RazerCam camera into 3rd party monitor utilizing threaded collar s-video connector such as Motec Camera...

Dakota Micro Monitor to Threaded Collar S-Video Female (Motec) Video Adapter Cable: Allows for the input of a single 3rd party camera utilizing threaded collar s-video connector such as Motec to be input into a Dakota Micro Monitor Camera Input...

AgCam/EnduraCam/RazerCam Camera to AgLeader Monitor Video Adapter Cable: Allows for the input of up to four AgCam/EnduraCam/RazerCam cameras into AgLeader Integra or Versa monitors Camera Input – 4 AgCam/EnduraCam/RazerCam Camera Inputs Power...

AgCam/EnduraCam/RazerCam Camera to Trimble Video Adapter Cable: Allows for the input of a single AgCam/EnduraCam/RazerCam camera into a Trimble TmX, FmX or 750 monitor Camera Input – 1 AgCam/EnduraCam/RazerCam Camera Input Power Input –...

AgCam/EnduraCam/RazerCam Camera to Danfoss Monitor: Allows for the input of up to two AgCam/EnduraCam/RazerCam cameras into a DanFoss Monitor Camera Input – 2 AgCam/EnduraCam/RazerCam Camera Inputs Power Input – None required, camera...

AgCam/EnduraCam/RazerCam Camera to Case IH New Holland AFS Pro 1200: Allows for the input of two AgCam/EnduraCam/RazerCam cameras into AFS Pro 1200 monitors and New Holland T8 and T9 with PLM intelligence.  Camera Input – 2...

AgCam/EnduraCam/RazerCam Camera to Camera Ready Case IH 40 Series Sprayer with CNH Pro 700 Monitor Adapter Cable: Allows for the input of up to three AgCam/EnduraCam/RazerCam Analog cameras into Case IH 40 series sprayers with Pro 700...

AgCam/EnduraCam/RazerCam Camera to CNH 7-pin Mini Amp Video Adapter Cable: Allows for the input of a single AgCam/EnduraCam/RazerCam Analog camera into pre-wired Case IH New Holland combines Camera Input – 1 AgCam/EnduraCam/RazerCam Analog...

AgCam/EnduraCam/RazerCam Camera to CNH IntelliView Three Camera Video Adapter Cable: Allows for the input of up to three AgCam/EnduraCam/RazerCam cameras into Case IH New Holland  IntelliView or AFS Pro monitors  Camera Input – 3...

AgCam/EnduraCam/RazerCam Camera to CNH IntelliView or DVR One Camera Video Adapter Cable: Allows for the input of a single AgCam/EnduraCam/RazerCam Analog/CVBS camera into a Case IH New Holland IntelliView Monitor or DVR  Camera Input – 1...

Dakota Micro Monitor to Audiovox Video Adapter Cable: Allows for the input of one Audiovox, Voyager or ToughCam camera into a Dakota Micro Monitor Camera Input – 1 3rd party Camera Input Power Input – None required, camera powered by...

AgCam/EnduraCam/RazerCam Camera to Audiovox Video Adapter Cable: Allows for the input of a single AgCam/EnduraCam/RazerCam camera into Audiovox, Voyager and ToughCam monitors  Camera Input – 1 AgCam/EnduraCam/RazerCam Camera Input Power...

AgCam/EnduraCam/RazerCam Camera to OverView Monitor Adapter Cable: Allows for a single AgCam/EnduraCam/RazerCam Analog/CVBS camera to be input into all OverView or CabCam Monitors Camera Input – 1 AgCam/EnduraCam/RazerCam Camera Input Power...

OverView Camera to Dakota Micro Monitor Video Adapter Cable: Allows for the input of a single OverView or CabCam Camera into a Dakota Micro Monitor Camera Input – 1 3rd party Camera Input Power Input – None required, camera powered by...

AgCam/EnduraCam/RazerCam Camera to TOPCON X30 and C3000 Adapter Cable: Allows for the input of up to two AgCam/EnduraCam/RazerCam cameras into TOPCON X30 monitors or AGCO C2200 & C3000 monitors Camera Input – 2 AgCam/EnduraCam/RazerCam...

AgCam/EnduraCam/RazerCam Camera to USB Adapter Cable: Allows for the input of up to two AgCam, EnduraCam or RazerCam cameras into USB port. Separate power required.*Customer responsible for computer & networking troubleshooting Length: 64.75 in...

AgCam/EnduraCam/RazerCam Camera to Claas Video Adapter Cable: Allows for the input of a single AgCam, EnduraCam or RazerCam camera into Claas pre-wired equipment. Length: 11 in : Ship Weight: 0.10 lbs   User Manual DMAC-CLS

AgCam/EnduraCam/RazerCam Camera to CAT/Orlaco Video Adapter Cable: Allows for the input of a single AgCam, EnduraCam or RazerCam camera into CAT pre-wired equipment as well as the Orlaco Monitor. Length: 16 in : Ship Weight: 0.10 lbs   User...

AgCam/EnduraCam/RazerCam Camera JD CommandView II Cab Video Adapter Cable: Allows for the input of up to two AgCam, EnduraCam or RazerCam cameras into JD CommandView II Monitors. Length: 79 in : Ship Weight: 0.35 lbs   User Manual...

AgCam/EnduraCam/RazerCam Camera to JD 6R or NH CR Combine Video Adapter Cable: Allows for the input of a single AgCam, EnduraCam or RazerCam camera into JD 6R Series Command Center Console Monitor or NH CR Combine. Length: 180 in : Ship Weight: 0.60...

AgCam/EnduraCam/RazerCam Camera to JD Command Center Video or 4600 Gen 4 Adapter Cable: Allows for the input of a single AgCam, EnduraCam or RazerCam camera into JD Command Center Console and 4600 Gen 4 Monitors. Length: 20 ft : Ship Weight: 0.55...

AgCam/EnduraCam/RazerCam Camera to JD2630 Three Camera Video Adapter Cable: Allows for the input of up to three AgCam, EnduraCam or RazerCam cameras into JD GS3 2630 Monitors. Length: 133 in : Ship Weight: 0.90 lbs Important: This cable...

AgCam/EnduraCam/RazerCam Camera to JD4640 Four Camera Video Adapter Cable: Allows for the input of up to four AgCam, EnduraCam or RazerCam cameras into JD GS4 4640 Monitors. Length: 133 in : Ship Weight 1.00 lbs   Camera Input – 4...

DM Wireless 20ft Antenna Extension Cable: Allows for the mounting of wireless antennas that require lengths over 40ft. Several can be used together for distances up to 100ft. Length: 20 ft : Ship Weight: 0.50 lbs   DM Wireless 20ft Antenna...

DM AHD Wireless Pair Includes AHD wireless 4-channel waterproof transmitter & receiver, two (2) each of 3dBI antenna, 12v power, A/C power, and hardwire power option. CVBS Compatible. Transmitters and receivers are also available individually...

DM AHD Wireless Receiver AHD wireless 4-channel receiver kit including: Analog High Definition wireless waterproof receiver, 12v power adapter, AC adapter, hardwire power option, and 3dBi antenna. CVBS compatible. Ship Weight: 1.60 lbs IMPORTANT:...

DM AHD Wireless Transmitter AHD wireless 4-channel transmitter kit including: Analog High Definition wireless waterproof transmitter, 12v power adapter, AC adapter, hardwire power option, and 3dBi antenna. CVBS compatible. Ship Weight: 1.5...

DM Wireless Mobile 5dBi Antenna (DKM-DMAC-MA5)Includes 6ft attached extension cable and magnetic mounting base. Max. Transmission distance 1-2 miles with line of sight.Ship Weight: 0.70 lbs   DM Wireless Mobile 7dBi Permanent Mount...

RazerCam 170° Universal Camera Bracket: Universal bracket has an advanced configuration to allow 170° camera to be mounted without drilling holes in equipment  Camera and Monitor not included with bracket

Active L1 GNSS Antenna compatible with Juniper Geode GNS1, GNS2, GNS3, Bad Elf Flex as well as SXBlue and Arrow receivers. Configured for single frequency (L1 GNSS) GNSS receivers. Single Freq. (L1) mConstellation (GPS, GLONASS, Beidou, Galileo, QZSS) 2...

18W USB Type-C Power Adaptor w/ International Plug Kit (EU, UK) for the Juniper Geode GNS3.

Active GNSS Antenna compatible with Juniper Geode GNS3 and Bad Elf Flex as well as SXBlue and EOS Arrow receivers. Configured for high precision users and multi frequency, RTK enabled GNSS receivers. mFreq. (L1, L2, L5, Atlas) mConstellation (GPS,...

(1) LHN Monopod: 5.5' w/ 1/4-20 maleIncludes ground shipping

Juniper Geode Grip for SmartPhones (for GNS1, GNS2, and GNS3) The new Juniper Systems Geode Grip is now available and shipping. This is an OEM part from Juniper Systems, the Geode Grip for SmartPhones is a standalone component that connects the Geode...

Juniper Geode Grip Base (AMPS Pattern) (for GNS1, GNS2, and GNS3) The new Juniper Systems Geode Grip is now available and shipping. This is an OEM part from Juniper Systems, the Geode Grip Base (AMPS Pattern) is the key component that builds the Geode...